Wax deposit is of a great concern in the petroleum industry and causes partial or total blockage of the pipelines. In this work, four Brazilian crude oils (P1-P4) and five inhibitors solutions (I1-I5) were used associating rheology results to understand, at a molecular level, the characteristics of the saturated fractions by high-resolution mass spectrometry (Orbitrap coupled to atmospheric pressure chemical ionization (APCI) source) and two-dimensional gas chromatography coupled to mass spectrometry (GC × GC-MS). The effectiveness of wax inhibitors can be demonstrated by the viscosity decrement. The characterization of the saturated fractions by GC × GC-MS and high resolution mass spectrometry showed that is possible to conclude that inhibitor I1 favored the inhibition process of paraffins when oils have a smaller and monocyclic saturated chain hydrocarbon (HC) profiles, whereas for oils with larger amounts of polycyclic chain HCs, the inhibitor I4 appeared to be the alternative.

Hydrocarbons present in saturated fractions of crude oils can be assessed by atmospheric pressure chemical ionization (APCI) using small hydrocarbons as ionizing reagents in a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS). In this work, five paraffin standards of different average molar mass distributions (Mw) were easily ionized by APCI(+)FT-ICR MS using isooctane as the reagent gas. Data of Mw, carbon number and double bond equivalent (DBE) distributions corresponding to linear and cyclic hydrocarbons (HCs) were compared to results obtained from analysis of high temperature gas chromatography with a flame ionization detector (HTGC-FID), comprehensive two-dimensional gas chromatography coupled to mass spectrometry (GC×GC-MS) and 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. APCI(+)FT-ICR MS data showed good agreement with those of analytical techniques. Furthermore, the ability of APCI(+) to assess n-paraffin, even in blends with polyaromatic hydrocarbon molecules such as coronene (Mw = 301 Da) at concentrations from 2.5 to 25 µg mL-1, was demonstrated. The typical MS paraffin profile (containing repeating mass units of 14 Da) was clearly confirmed, being totally suppressed when a concentration of 25 µg mL-1 of coronene was used. This phenomenon was also evidenced in one of two saturated fractions produced using saturates, aromatics and polar (SAP) compound fractionation methodology.

Drug trafficking and the introduction of new drugs onto the illicit market are one of the main challenges of the forensic community. In this study, the chemical profile of a new designer drug, 2-(4-iodine-2,5-dimethoxyphenyl)-n-[(2-methoxyphenyl)methyl]etamine or 25I-NBOMe was explored using thin layer chromatography (TLC), ultraviolet-visible spectrophotometry (UV-Vis), attenuated total reflection with Fourier transform infrared spectroscopy(ATR-FTIR), gas chromatography mass spectrometry (GC-MS) and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry (ESI-FT-ICR MS). First, the TLC technique was effective for identifying spots related to 25C-, 25B- and 25I-NBOMe compounds, all with the same retention factor, Rf ≈ 0.50. No spot was detected for 2,5-dimethoxy-4-bromoamphetamine, 2,5-Dimethoxy-4-chloroamphetamine or lysergic acid diethylamide compounds. ATR-FTIR preserved the physical-chemical properties of the material, whereas GC-MS and ESI-MS showed better analytical selectivity. ESI(+)FT-ICR MS was used to identify the exact mass (m/z428.1706 for the [M + H]+ ion), molecular formula (M = C18H22INO3), degree of unsaturation (DBE = 8) and the chemical structure (from collision induced dissociation, CID, experiments) of the 25I-NBOMe compound. Furthermore, the ATR-FTIR and CID results suggested the presence of isomers, where a second structure is proposed as an isomer of the 25I-NBOMe molecule.

Cocaine is usually seized mixed with a wide variety of adulterants such as benzocaine, lidocaine, caffeine, and procaine. The forensic identification of cocaine in these street drug mixtures is normally performed using colorimetric testing kits, but these tests may suffer from interferences, producing false-positive results. Here, we describe the use of analytical techniques including attenuated total reflection Fourier transform infrared (ATR-FTIR) and ultraviolet-visible (UV-VIS) spectroscopies to distinguish between cocaine and other adulterants (lidocaine, promethazine, powdered milk and yeast) that yield positive results on the Scott test using the thiocyanate cobalt reagent. A further 13 substances were also analyzed using the Scott test.